The main feature of the worm gear reducer is that it has a reverse self-locking function and can have a larger reduction ratio. The input shaft and the output shaft are not on the same axis or on the ...
1. The internal structure design of the reducer is not standardized In the structure of the reducer, due to the design of the cover plate above the inspection hole is too thin, it is easy to deform lo...
Helical gear reducer can be realized by straight tooth, helical tooth and spiral spiral bevel gear. Generally, the shafts of a helical gear reducer intersect at 90 degrees, and in principle there are ...
The reducer is a power transmission mechanism in a low-speed high-torque mechanical transmission device. It is used in many fields such as construction machinery, lifting and transportation, smelting,...
1. Inspection hole In order to check the meshing of the transmission parts and pour lubricating oil into the box, an inspection hole should be set in the appropriate position of the box. The inspectio...
Gear motors are usually used in low-speed and high-torque transmission equipment. By making the gear on the input shaft of the reducer mesh with the large gear on the output shaft to achieve the purpo...
+86-0571-57159502
+86-15268125268
address：
Jiahuang Transmission Technology Co., Ltd., Bailang Village, Yipeng Street, Xiaoshan District, Hangzhou, Zhejiang, China
E-mail:
t.guan@jiahuangtech.com
Phone: +86-15268125268
Fax: +86-0571-57159502