WP Worm Gear reducer machine

WP Worm Gear reducer machine-installation precautions:
If the reducer is stored for 4-6 months, check whether the oil seal is immersed in the lubricating oil. The lip of the oil seal may stick to the shaft and even lose its elasticity. Since suitable elasticity is a necessary working condition for the oil seal, It is recommended to replace the oil seal;
All rubber parts and ventilation holes must not be stained with paint;
When connecting with the hollow shaft or solid shaft of the reducer, lubricating oil should be applied to the matching part of the shaft to avoid jamming or oxidation;
The oil level must be checked during use (such as the oil level mirror hole or the oil plug, the small model does not have it);
When using the new WP Worm Gear reducer machine, it cannot start at full load, and the load should be gradually increased.