Summary:Reducer model selection
Try to choose a reduction ratio close to the ideal: reduction ratio = servo ...
Reducer model selection
Try to choose a reduction ratio close to the ideal: reduction ratio = servo motor speed / reducer output shaft speed. Torque calculation: For the life of the reducer, the torque calculation is very important, and it is necessary to pay attention to the maximum torque value (TP) of the acceleration, whether it exceeds the maximum load torque of the reducer.
The applicable power is usually the applicable power of the servo models on the market. The applicability of the reducer is very high, and the working coefficient can be maintained above 1.2, but the selection can also be determined according to your own needs.
There are two main points:
1. The output shaft diameter of the selected servo motor cannot be larger than the maximum used shaft diameter on the table;
2. If the torque is calculated, the rotation speed can meet the normal operation, but when the servo is fully output, if there is insufficient phenomenon, the current limit control can be performed on the motor side driver, or the torque protection can be performed on the mechanical shaft. very necessary.
The selection of general reducer includes the steps of proposing original conditions, selecting types, and determining specifications. In contrast, the type selection is relatively simple, while accurately providing the working conditions of the reducer, and mastering the design, manufacture and use characteristics of the reducer are the keys to the correct and reasonable selection of the specifications of the general reducer. The selection of specifications should meet the conditions of strength, thermal balance, and radial load on the shaft extension.
Hangzhou Jiahuang Transmission Technology Co.，Ltd. is located at the famous city Hangzhou——Jiangdong Industrial Park, which is only 5km away from Hangzhou International Airport, 6km from Hu-Hang-Yong highway, being convenient in terms of transportation. Jiahuang is an enterprise combining R&D and manufacture as a whole, specializing in developing and producing various RV reducer, worm elevator, gear reducer, cycloidal reducer, opener, valve hoist, and UD planetary stepless gear. Taking the lead in getting its own import and export rights in the same line.
