Industry News

  • Some problems that need to be understood in the process of using cycloid reducer

    2020-20-08

    When buying a cycloid reducer, in addition to paying attention to the problems of the product itself, you also need to understand what you need to pay attention to when using the cycloid reducer, so a...

  • Special reducer for fitness equipment

    2020-12-08

    Special reducer for fitness equipment NMRV series cycloid reducer 1. Smooth transmission, low vibration, impact and noise, large reduction ratio, wide versatility, and can be used with various mechani...

  • Trouble shooting method of worm planetary reducer

    2020-07-08

    1. Planetary reducer overheating: overloading, too little or too much lubricating oil, poor or inappropriate lubricating oil, excessive friction of the oil seal, improper connection between the output...

  • Reducer frame type

    2020-30-07

    1. Rack without fulcrum: The rack itself has no shaft supporting point. The stirring shaft is based on the two supporting shafts of the output shaft of the reducer as the force fulcrum, which can be u...

  • The development history of worm gear planetary reducer

    2020-24-07

    In the 1970s and 1980s, the world's reducer technology has been greatly developed, and it is strictly separated from the development of new technology reaction. The correct installation, use and maint...

  • The difference between ordinary motor, reduction motor, stepper motor and reducer

    2020-16-07

    The ordinary motors, stepper motors, and reducers mentioned here refer to DC micromotors, and most of the contacts we usually make are DC motors. The correct installation, use and maintenance of the p...

Cotact Us