(1) During the transportation, assembly, disassembly, operation and maintenance of the turbo reducer, all insurance and environmental related systems must be implemented.

(2) The operation, maintenance and repair of the reducer must be carried out by trained and qualified personnel. Pinwheel reducer is a device that decelerates the number of revolutions of the motor to the required number of revolutions and obtains a larger torque. The reducer is a relatively precise machine, and its purpose is to reduce the speed and increase the torque. The pin wheel reducer adopts the principle of cycloidal pin tooth meshing and planetary transmission, so it is usually called planetary cycloidal reducer.

(3) It is forbidden to use high-pressure washing equipment to wash the cycloid reducer.

(4) All maintenance related to the cycloid reducer must be vigilantly carried out, all with insurance as the goal.

(5) Maintenance of the reducer must be carried out when the machine is completely stopped. The drive components must avoid occasional start-ups (such as locking the power switch or removing the power fuse), and the warning signs of "under repair" must be set.

(6) Welding operations on the reducer are prohibited. Because welding will cause irreparable damage to the teeth and bearings, it is forbidden to use the reducer as a ground electrode during welding.

(7) If abnormal conditions (such as overheating or abnormal noise) are discovered during operation, the drive components must be broken and closed. Pinwheel reducer is a device that decelerates the number of revolutions of the motor to the required number of revolutions and obtains a larger torque. The reducer is a relatively precise machine, and its purpose is to reduce the speed and increase the torque. The pin wheel reducer adopts the principle of cycloidal pin tooth meshing and planetary transmission, so it is usually called planetary cycloidal reducer.

(8) Rotating transmission parts such as couplings, gears, pulleys, etc., must be equipped with a protective cover to avoid accidental contact.

(9) The various markings attached to the reducer, such as the label, the direction of rotation, etc., must be stored properly and cannot be stained or painted at any time.

(10) Various electrical appliances should be fully grounded as required. Planetary cycloid reducer is a relatively new type of transmission mechanism. Its unique and stable structure can replace ordinary cylindrical gear reducers and worm gear reducers in many cases, because the planetary cycloid reducer has high speed ratio, high efficiency and compact structure. , Small size, stable operation, low noise, reliable use, long life, reasonable design, convenient maintenance, easy to disassemble and install.

/