News

How to improve the heat dissipation efficiency of the reducer

Updated:2021-06-23
Summary:The reducer generates some heat during operation. If it is not radiated in time, it will cause adver...

The reducer generates some heat during operation. If it is not radiated in time, it will cause adverse effects on the body. Therefore, timely heat dissipation is required, and timely heat dissipation can avoid some circuit overheating problems and protect the human body. How to improve its heat dissipation efficiency?
1. Increase heat dissipation: If the ordinary cabinet cannot meet the heat dissipation requirements, you can add heat sinks outside the cabinet. Heat sinks should be provided to allow air to circulate naturally. It has the advantages of simple structure, convenient installation, good heat dissipation effect and easy serialization.
2. System cooling: use fan to dissipate heat, simple and easy to operate, easy to operate. However, the disadvantage of the fan cooling method is that it is not suitable for certain situations. For example, when the reducer is scattered in a coal mine, the use of a fan will seriously pollute the surrounding working environment and mechanical equipment, and it uses radiation for heat exchange. The heat loss is also very limited.


3. Lubricating oil circulation: Install a water-cooled or air-cooled device outside the reducer to cool the lubricating oil, and the cooled lubricating oil returns to the reducer for lubrication. This type of cooling is mainly used for high power or high ambient temperature. The advantage lies in the good cooling effect and the long life of the lubricating oil.
Improving the heat dissipation efficiency of the reducer will be more conducive to the heat dissipation of the equipment, and the excess heat will be dissipated in time to prevent the body from overheating. Using it in a ventilated environment has a strong effect on improving efficiency and enhancing heat dissipation.


In addition, the reducer should be installed at a temperature with better ventilation and cooling requirements. Prevent in places that are too hot or humid. The motor of the reducer must be connected correctly. There are grounding devices and symbols in the wiring device. There is also a demand for the working environment of the reducer motor.

Recommended Products

Cotact Us