Now many customers are using reducers to buy the old gear and start using them. When the reducer is broken, replace it with another one. The warranty period says that the quality of the reducer is unacceptable and requires replacement and free repair. Very speechless. The reducer also needs maintenance, just like we bought a car, how many kilometers to drive to change oil, how many companies need maintenance, the same reason, the reducer also needs maintenance. So how to maintain it, let me talk about it.
1. Regularly check whether the device foundation, seals, transmission shaft, etc. are normal. 2. For normal operation, always check the oil level of the lubricant (observed through the oil window). The maximum temperature of the lubricant should be less than 85 ° C. When the oil temperature rises abnormally and abnormal noise occurs, it must be stopped and checked immediately, and the fault can be continuously used. 3. Replacement of new spare parts must be officially used after running-in and load test. 4. Do not hammer the reducer casing with gravity to avoid damage. Second, the use of oil to view and replace: 1, reducer operating environment temperature is -40 ~ +40 ℃. When the ambient temperature is lower than 0 ° C, the lubricating oil must be heated to above 0 ° C or a low freezing point lubricant should be used before starting. 2. The first use or new replacement of the worm pair or reduction gear pair, the replacement of lubricant after 150-400 hours of operation, the subsequent oil change cycle is less than or equal to 4000 hours. 3. Regularly check the quantity and quality of the oil, save enough lubricant, and replace the oil mixed with impurities or metamorphoses in time. 4. The amount of oil injected must be in accordance with requirements. Different brands of oil are prohibited from being mixed. Oils of the same brand but different viscosity are allowed to be mixed. 5. Regularly check the quantity and quality of the oil, save enough lubricating oil, and replace the oil mixed with impurities or decay in time.
I hope that the above maintenance methods can help everyone, and I also hope that everyone can treat the reducer like a car, so that the operating life of the reducer is extended, and your production efficiency is up. Wenzhou Xinjin Transmission Manufacturing Co., Ltd. warmly welcomes scientific research, planning, business, and people of insight to cooperate closely and work together.

https://www.jiahuangtech.com/